Specna Dual Tone Assembled Keymod 7"

Specna Arms is made largely of a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). The stock, magazine and the pistol grip were made from polymer. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. 

The replica’s parts are very well aligned - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered. 

The replica features a quick spring change system, so-called Enter & Convert™. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring exchange lasts literally seconds.

The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and much freedom. Enter & Convert™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. 

A reinforced at the cylinder level gearbox contains a steel spring guide that is an element of Enter & Convert™ system and mounted on 8 mm ball bearings and caps steel gears. The system is secured with four anti-reversal latches. A light, made from a polycarbonate polymer piston is equipped with a steel tooth in order to increase its durability. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.

The upgraded version features an array of new, reinforced parts such as:

- set of reinforced, steel gears

- steel spring guide

- lightweight, polymer piston

- aluminum air-sealed piston head

- metal cylinder head

- air-sealed, metal nozzle

Specna Dual Tone Assembled Keymod 7"

259,00 €

  • 5 kg
  • Sold Out

Specna Dual Tone Assembled Keymod10"

Specna Arms is made largely of a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). The stock, magazine and the pistol grip were made from polymer. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. 

The replica’s parts are very well aligned - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered. 

The replica features a quick spring change system, so-called Enter & Convert™. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring exchange lasts literally seconds.

The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and much freedom. Enter & Convert™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. 

A reinforced at the cylinder level gearbox contains a steel spring guide that is an element of Enter & Convert™ system and mounted on 8 mm ball bearings and caps steel gears. The system is secured with four anti-reversal latches. A light, made from a polycarbonate polymer piston is equipped with a steel tooth in order to increase its durability. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.

The upgraded version features an array of new, reinforced parts such as:

- set of reinforced, steel gears

- steel spring guide

- lightweight, polymer piston

- aluminum air-sealed piston head

- metal cylinder head

- air-sealed, metal nozzle

Specna Dual Tone Assembled Keymod10"

259,00 €

  • 5 kg
  • Limited Availability
  • consegna in 24/48h1

SA-V66 ONE™ Carbine Replica - Black

SA-V66 ONE™ Carbine Replica

SA-V66 carbine replica by Specna Arms is made largely of a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). The stock, magazine and the pistol grip were made from polymer. The receiver of the replica and the RIS handguard have undergone the process of anodizing, which guarantees a high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. 

The replica’s parts are very well aligned - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered. 

The replica features a quick spring change system, so-called Enter & Convert™. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring exchange lasts literally seconds.

The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and much freedom. Enter & Convert™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. 

A reinforced at the cylinder level gearbox contains a steel spring guide that is an element of Enter & Convert™ system and mounted on 8 mm ball bearings and caps steel gears. The system is secured with four anti-reversal latches. A light, made from a polycarbonate polymer piston is equipped with a steel tooth in order to increase its durability. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.

The upgraded version features an array of new, reinforced parts such as:

- set of reinforced, steel gears

- steel spring guide

- lightweight, polymer piston

- aluminum air-sealed piston head

- metal cylinder head

- air-sealed, metal nozzle

The replica is equipped with a top RIS 22 mm rail, MLOK handguard and an adjustable stock. The top RIS rail features flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s length to the body type and preferences of the User. The flash hider is based on a 14 mm left-handed thread, which allows the attachment of a silencer in its place.

In order to enhance the realism of the game, the replica also features an operational bolt-catch mechanism.

SA-V66 ONE™ Carbine Replica - Black

239,00 €

  • 4 kg
  • Sold Out

SA-V64 ONE™ Carbine Replica - Black

SA-V66 ONE™ Carbine Replica

SA-V66 carbine replica by Specna Arms is made largely of a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). The stock, magazine and the pistol grip were made from polymer. The receiver of the replica and the RIS handguard have undergone the process of anodizing, which guarantees a high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. 

The replica’s parts are very well aligned - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered. 

The replica features a quick spring change system, so-called Enter & Convert™. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring exchange lasts literally seconds.

The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and much freedom. Enter & Convert™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. 

A reinforced at the cylinder level gearbox contains a steel spring guide that is an element of Enter & Convert™ system and mounted on 8 mm ball bearings and caps steel gears. The system is secured with four anti-reversal latches. A light, made from a polycarbonate polymer piston is equipped with a steel tooth in order to increase its durability. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.

The upgraded version features an array of new, reinforced parts such as:

- set of reinforced, steel gears

- steel spring guide

- lightweight, polymer piston

- aluminum air-sealed piston head

- metal cylinder head

- air-sealed, metal nozzle

The replica is equipped with a top RIS 22 mm rail, MLOK handguard and an adjustable stock. The top RIS rail features flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s length to the body type and preferences of the User. The flash hider is based on a 14 mm left-handed thread, which allows the attachment of a silencer in its place.

In order to enhance the realism of the game, the replica also features an operational bolt-catch mechanism.

SA-V64 ONE™ Carbine Replica - Black

239,00 €

  • 4 kg
  • Sold Out

SA-E21 PDW EDGE™ Carbine Replica - black

METAL BODY

SISTEMA ESA QUICK SPRING CHANGE 

GEAR BOX SERIE ORION RINFORZATO

-PISTONE IN POLIMERO RINFORZATO CON TUTTI I DENTI IN METALLO

-TESTA PISTONE IN ALLUMINIO DOPPIO O-RING

-TESTA CILINDRO IN ALLUMINIO DOPPIO O-RING

-SPINGIPALLINO IN ALLUMINIO CON O-RING

-INGRANAGGI IN ACCIAIO 18:1 CON DELAYER

-BOCCOLE CUSCINETTATE DA 8MM IN ACCIAIO

-MECCANICA PREPARATA PER SUPPORTARE FINO A MOLLE M140

MOSFET X-ASR GATE CHE  POTENZIA LA VELOCITA', LA REATTIVITA' E PROLUNGA LA DURATA DELL'ELETTRONICA.

PERMETTE INOLTRE DI DIAGNIOSTICARE MALFUNZIONAMENTI ALL'INTERNO DELLA REPLICA GRAZIE A DIODI DI STATO INTEGRATI. 

IMPUGNATURA GRIP QD PER SGANCIO RAPIDO DEL MOTORE SENZA L'USO DI STRUMENTI

CANNA DI PRECISIONE DA 6,03 E T-HOP UP ROTATIVO  

 

GRIP ANTERIORE M-LOK ANGOLATA IN TECNOPOLIMERO 

 

IL SET INCLUDE:

REPLICA

2X CARICATORI MID CAP S-MAG 

 

SCHEDA DIAGNOSTICA GATE X-ASR

IMPUGNATURA VERTICALE

SA-E21 PDW EDGE™ Carbine Replica - black

239,00 €

  • Sold Out

Daniel Defense® MK18 SA-E19 EDGE™ Carbine Replica - Chaos Bronze

Daniel Defense® MK18 SA-E19 EDGE™ Carbine Replica

EDGE™ is a line of replicas by Specna Arms that combines an array of solutions and technologies hard to find in other replicas on the market. It is a series that puts stress on very good craftsmanship of the exterior, solutions that improve upon the versatility of the replica, prolong its lifetime, simplify the diagnostics of a malfunction as well as facilitate the possibility of a power tuning. Straight out of the box you get a replica that does not require any modification, however, if needed - they will be extremely simple.

The replica was manufactured in cooperation with EMG Arms brand. The carbine has engraved licensed markings of Daniel Defense® - a firearms manufacturer from the USA, which since 2002 specializes in providing various variants of the AR15 and accessories, also on special requests by USSOCOM.

Every element of the replica had been made and fitted with the utmost care for every detail. In addition, the body features a Nano Coating finish that prevents scratches. The body also bears individual serial number further authenticated by an additional hologram as well as a double-sided tactical sling swivel.

SA-E19 carbine replica is equipped with an RIS 22 mm handguard. The barrel features a standard muzzle device on a 14 mm CCW thread. The top of the replica features flip-up iron sights.

The carbine features a factory-fitted MOSFET X-ASR module by Polish GATE. It is an unprecedented cooperation between a Polish manufacturer and a factory known for its airsoft replicas. The highest-quality MOSFET X-ASR looks after the safety of the replica components, improves the trigger reaction and extends the lifetime of electronics and the battery. It will also enable diagnosing basic malfunctions inside the replica thanks to integrated status diodes.

The replica features an internal precision barrel with 6.03 mm in diameter that provides high accuracy and repeatability of fired shots. The barrel works in tandem with a new type of a Hop-Up rotary chamber that allows for a very precise and stable adjustment of the BB spin.

The replica features an ESA™ Quick Spring Change System. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - all that is required is to remove the stock tube in order to gain access to the spring so that it can be removed without having to pull out or disassemble the gearbox.

The advantages of the ESA™ system are hard to overstate. In the light of current internal regulations inside various groups, the system guarantees the User a varied set of possibilities and plenty of freedom. ESA™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and the safety for the User himself as well as other participants. Inside the box, along with the replica, is another M90 main spring that is excellent for indoor operations.

The heart of the replica consists of the ORION gearbox based on a reinforced frame and equipped with the function of the main spring release. The replica features an array of high-grade parts right out of the box, which makes it characteristic for its reliability and preparedness for further tuning. ORION gearbox is ready for cooperation with M140 springs. Inside, there are elements such as:

- reinforced polymer piston with a full, steel jaw

- aluminum, air-sealed nozzle

- aluminum, double air-sealed cylinder head

- aluminum, double air-sealed piston head with bearings

- bearing-mounted spring guide

- set of steel gears

- 8 mm ball bearings

The box, apart from the replica, includes two Mid-Cap S-MAG magazines with a capacity of 125 BBs each. S-MAG is an exclusive polymer magazine designed by Specna Arms. Noteworthy is the characteristic texture comprised of Specna Arms logos. S-MAG facilitates a seamless feeding of BBs even at high ROF.

 

Daniel Defense® MK18 SA-E19 EDGE™ Carbine Replica - Chaos Bronze

269,00 €

  • Sold Out

Daniel Defense® MK18 SA-E19 EDGE™ Carbine Replica - Black

Daniel Defense® MK18 SA-E19 EDGE™ Carbine Replica

EDGE™ is a line of replicas by Specna Arms that combines an array of solutions and technologies hard to find in other replicas on the market. It is a series that puts stress on very good craftsmanship of the exterior, solutions that improve upon the versatility of the replica, prolong its lifetime, simplify the diagnostics of a malfunction as well as facilitate the possibility of a power tuning. Straight out of the box you get a replica that does not require any modification, however, if needed - they will be extremely simple.

The replica was manufactured in cooperation with EMG Arms brand. The carbine has engraved licensed markings of Daniel Defense® - a firearms manufacturer from the USA, which since 2002 specializes in providing various variants of the AR15 and accessories, also on special requests by USSOCOM.

Every element of the replica had been made and fitted with the utmost care for every detail. In addition, the body features a Nano Coating finish that prevents scratches. The body also bears individual serial number further authenticated by an additional hologram as well as a double-sided tactical sling swivel.

SA-E19 carbine replica is equipped with an RIS 22 mm handguard. The barrel features a standard muzzle device on a 14 mm CCW thread. The top of the replica features flip-up iron sights.

The carbine features a factory-fitted MOSFET X-ASR module by Polish GATE. It is an unprecedented cooperation between a Polish manufacturer and a factory known for its airsoft replicas. The highest-quality MOSFET X-ASR looks after the safety of the replica components, improves the trigger reaction and extends the lifetime of electronics and the battery. It will also enable diagnosing basic malfunctions inside the replica thanks to integrated status diodes.

The replica features an internal precision barrel with 6.03 mm in diameter that provides high accuracy and repeatability of fired shots. The barrel works in tandem with a new type of a Hop-Up rotary chamber that allows for a very precise and stable adjustment of the BB spin.

The replica features an ESA™ Quick Spring Change System. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - all that is required is to remove the stock tube in order to gain access to the spring so that it can be removed without having to pull out or disassemble the gearbox.

The advantages of the ESA™ system are hard to overstate. In the light of current internal regulations inside various groups, the system guarantees the User a varied set of possibilities and plenty of freedom. ESA™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and the safety for the User himself as well as other participants. Inside the box, along with the replica, is another M90 main spring that is excellent for indoor operations.

The heart of the replica consists of the ORION gearbox based on a reinforced frame and equipped with the function of the main spring release. The replica features an array of high-grade parts right out of the box, which makes it characteristic for its reliability and preparedness for further tuning. ORION gearbox is ready for cooperation with M140 springs. Inside, there are elements such as:

- reinforced polymer piston with a full, steel jaw

- aluminum, air-sealed nozzle

- aluminum, double air-sealed cylinder head

- aluminum, double air-sealed piston head with bearings

- bearing-mounted spring guide

- set of steel gears

- 8 mm ball bearings

The box, apart from the replica, includes two Mid-Cap S-MAG magazines with a capacity of 125 BBs each. S-MAG is an exclusive polymer magazine designed by Specna Arms. Noteworthy is the characteristic texture comprised of Specna Arms logos. S-MAG facilitates a seamless feeding of BBs even at high ROF.

 

Daniel Defense® MK18 SA-E19 EDGE™ Carbine Replica - Black

269,00 €

  • Sold Out

SA-E21 PDW EDGE™ Carbine Replica - Half-Bronze

 

METAL BODY

SISTEMA ESA QUICK SPRING CHANGE 

GEAR BOX SERIE ORION RINFORZATO

-PISTONE IN POLIMERO RINFORZATO CON TUTTI I DENTI IN METALLO

-TESTA PISTONE IN ALLUMINIO DOPPIO O-RING

-TESTA CILINDRO IN ALLUMINIO DOPPIO O-RING

-SPINGIPALLINO IN ALLUMINIO CON O-RING

-INGRANAGGI IN ACCIAIO 18:1 CON DELAYER

-BOCCOLE CUSCINETTATE DA 8MM IN ACCIAIO

-MECCANICA PREPARATA PER SUPPORTARE FINO A MOLLE M140

MOSFET X-ASR GATE CHE  POTENZIA LA VELOCITA', LA REATTIVITA' E PROLUNGA LA DURATA DELL'ELETTRONICA.

PERMETTE INOLTRE DI DIAGNIOSTICARE MALFUNZIONAMENTI ALL'INTERNO DELLA REPLICA GRAZIE A DIODI DI STATO INTEGRATI. 

IMPUGNATURA GRIP QD PER SGANCIO RAPIDO DEL MOTORE SENZA L'USO DI STRUMENTI

CANNA DI PRECISIONE DA 6,03 E T-HOP UP ROTATIVO  

 

GRIP ANTERIORE M-LOK ANGOLATA IN TECNOPOLIMERO 

 

IL SET INCLUDE:

REPLICA

2X CARICATORI MID CAP S-MAG 

 

SCHEDA DIAGNOSTICA GATE X-ASR

IMPUGNATURA VERTICALE

SA-E21 PDW EDGE™ Carbine Replica - Half-Bronze

239,00 €

  • Sold Out

SA-E20 EDGE™ Carbine Replica - Half-Bronze

METAL BODY

SISTEMA ESA QUICK SPRING CHANGE 

GEAR BOX SERIE ORION RINFORZATO

-PISTONE IN POLIMERO RINFORZATO CON TUTTI I DENTI IN METALLO

-TESTA PISTONE IN ALLUMINIO DOPPIO O-RING

-TESTA CILINDRO IN ALLUMINIO DOPPIO O-RING

-SPINGIPALLINO IN ALLUMINIO CON O-RING

-INGRANAGGI IN ACCIAIO 18:1 CON DELAYER

-BOCCOLE CUSCINETTATE DA 8MM IN ACCIAIO

-MECCANICA PREPARATA PER SUPPORTARE FINO A MOLLE M140

MOSFET X-ASR GATE CHE  POTENZIA LA VELOCITA', LA REATTIVITA' E PROLUNGA LA DURATA DELL'ELETTRONICA.

PERMETTE INOLTRE DI DIAGNIOSTICARE MALFUNZIONAMENTI ALL'INTERNO DELLA REPLICA GRAZIE A DIODI DI STATO INTEGRATI. 

IMPUGNATURA GRIP QD PER SGANCIO RAPIDO DEL MOTORE SENZA L'USO DI STRUMENTI

CANNA DI PRECISIONE DA 6,03 E T-HOP UP ROTATIVO  

 

GRIP ANTERIORE M-LOK ANGOLATA IN TECNOPOLIMERO 

 

IL SET INCLUDE:

REPLICA

2X CARICATORI MID CAP S-MAG 

 

SCHEDA DIAGNOSTICA GATE X-ASR

IMPUGNATURA VERTICALE

SA-E20 EDGE™ Carbine Replica - Half-Bronze

249,00 €

  • Sold Out

SA-E20 PDW EDGE™ Carbine Replica - Half-Bronze

METAL BODY

SISTEMA ESA QUICK SPRING CHANGE 

GEAR BOX SERIE ORION RINFORZATO

-PISTONE IN POLIMERO RINFORZATO CON TUTTI I DENTI IN METALLO

-TESTA PISTONE IN ALLUMINIO DOPPIO O-RING

-TESTA CILINDRO IN ALLUMINIO DOPPIO O-RING

-SPINGIPALLINO IN ALLUMINIO CON O-RING

-INGRANAGGI IN ACCIAIO 18:1 CON DELAYER

-BOCCOLE CUSCINETTATE DA 8MM IN ACCIAIO

-MECCANICA PREPARATA PER SUPPORTARE FINO A MOLLE M140

MOSFET X-ASR GATE CHE  POTENZIA LA VELOCITA', LA REATTIVITA' E PROLUNGA LA DURATA DELL'ELETTRONICA.

PERMETTE INOLTRE DI DIAGNIOSTICARE MALFUNZIONAMENTI ALL'INTERNO DELLA REPLICA GRAZIE A DIODI DI STATO INTEGRATI. 

IMPUGNATURA GRIP QD PER SGANCIO RAPIDO DEL MOTORE SENZA L'USO DI STRUMENTI

CANNA DI PRECISIONE DA 6,03 E T-HOP UP ROTATIVO  

 

GRIP ANTERIORE M-LOK ANGOLATA IN TECNOPOLIMERO 

 

IL SET INCLUDE:

REPLICA

2X CARICATORI MID CAP S-MAG 

 

SCHEDA DIAGNOSTICA GATE X-ASR

IMPUGNATURA VERTICALE

SA-E20 PDW EDGE™ Carbine Replica - Half-Bronze

269,00 €

  • Sold Out

SA-E39 EDGE™ Carbine Replica - Blue Edition

METAL BODY

SISTEMA ESA QUICK SPRING CHANGE 

GEAR BOX SERIE ORION RINFORZATO

-PISTONE IN POLIMERO RINFORZATO CON TUTTI I DENTI IN METALLO

-TESTA PISTONE IN ALLUMINIO DOPPIO O-RING

-TESTA CILINDRO IN ALLUMINIO DOPPIO O-RING

-SPINGIPALLINO IN ALLUMINIO CON O-RING

-INGRANAGGI IN ACCIAIO 18:1 CON DELAYER

-BOCCOLE CUSCINETTATE DA 8MM IN ACCIAIO

-MECCANICA PREPARATA PER SUPPORTARE FINO A MOLLE M140

MOSFET X-ASR GATE CHE  POTENZIA LA VELOCITA', LA REATTIVITA' E PROLUNGA LA DURATA DELL'ELETTRONICA.

PERMETTE INOLTRE DI DIAGNIOSTICARE MALFUNZIONAMENTI ALL'INTERNO DELLA REPLICA GRAZIE A DIODI DI STATO INTEGRATI. 

IMPUGNATURA GRIP QD PER SGANCIO RAPIDO DEL MOTORE SENZA L'USO DI STRUMENTI

CANNA DI PRECISIONE DA 6,03 E T-HOP UP ROTATIVO  

 

GRIP ANTERIORE M-LOK ANGOLATA IN TECNOPOLIMERO 

 

IL SET INCLUDE:

REPLICA

2X CARICATORI MID CAP S-MAG 

 

SCHEDA DIAGNOSTICA GATE X-ASR

IMPUGNATURA VERTICALE

SA-E39 EDGE™ Carbine Replica - Blue Edition

239,00 €

  • Sold Out

SA-E39 EDGE™ Carbine Replica - Red Edition

METAL BODY

SISTEMA ESA QUICK SPRING CHANGE 

GEAR BOX SERIE ORION RINFORZATO

-PISTONE IN POLIMERO RINFORZATO CON TUTTI I DENTI IN METALLO

-TESTA PISTONE IN ALLUMINIO DOPPIO O-RING

-TESTA CILINDRO IN ALLUMINIO DOPPIO O-RING

-SPINGIPALLINO IN ALLUMINIO CON O-RING

-INGRANAGGI IN ACCIAIO 18:1 CON DELAYER

-BOCCOLE CUSCINETTATE DA 8MM IN ACCIAIO

-MECCANICA PREPARATA PER SUPPORTARE FINO A MOLLE M140

MOSFET X-ASR GATE CHE  POTENZIA LA VELOCITA', LA REATTIVITA' E PROLUNGA LA DURATA DELL'ELETTRONICA.

PERMETTE INOLTRE DI DIAGNIOSTICARE MALFUNZIONAMENTI ALL'INTERNO DELLA REPLICA GRAZIE A DIODI DI STATO INTEGRATI. 

IMPUGNATURA GRIP QD PER SGANCIO RAPIDO DEL MOTORE SENZA L'USO DI STRUMENTI

CANNA DI PRECISIONE DA 6,03 E T-HOP UP ROTATIVO  

 

GRIP ANTERIORE M-LOK ANGOLATA IN TECNOPOLIMERO 

 

IL SET INCLUDE:

REPLICA

2X CARICATORI MID CAP S-MAG 

 

SCHEDA DIAGNOSTICA GATE X-ASR

IMPUGNATURA VERTICALE

SA-E39 EDGE™ Carbine Replica - Red Edition

239,00 €

  • Sold Out