Hop Up & Inner

Maxx Model CNC Aluminum Hopup Chamber SV - VFC SCAR-L/H

	Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
	Improved accuracy and ensure consistent air seal for VFC SCAR-L/H AEG series
	Precision rotary dial design for fine hopup adjustments
	Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
	Removable Brass Threaded Slot Pin for setup and maintenance
	Accepted the nozzle length from 21.00mm to 21.25mm on VFC SCAR-L and 38.50mm to 38.75mm on VFC SCAR-H
	Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
	Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
	Extended sliding arms design on both side of the chamber housing to ensure the hopup unit is always centered, straight and air tight at all times when closing the receivers
	The UV LED Tracer and Electronic Module to glow BBs in the dark ready!
	The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

Maxx Model CNC Aluminum Hopup Chamber SV - VFC SCAR-L/H

55,00 €

incl. VAT, shipping costs apply

Sold Out

Maxx Model ME - PRO CNC Hopup unit for M4 AEG

	Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
	Improved accuracy and ensure consistent air seal for M4/M16 Standard AEG series
	Precision rotary dial design for fine hopup adjustments
	Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
	Removable Brass Threaded Slot Pin for setup and maintenance
	Accepted the nozzle length from 21.00mm to 21.25mm
	Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
	Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
	Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
	Compatible with any V2 gear boxes with 11mm or 11.5mm bore
	Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
	Manually opened to release BBs from inside hopup chamber by hand
	The UV LED Tracer and Electronic Module to glow BBs in the dark ready!
	The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

Maxx Model ME - PRO CNC Hopup unit for M4 AEG

69,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Maxx Model ME - SPORT CNC Hopup unit for M4 AEG

	Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
	Improved accuracy and ensure consistent air seal for M4/M16 Standard AEG series
	Precision rotary dial design for fine hopup adjustments
	Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
	Removable Brass Threaded Slot Pin for setup and maintenance
	Accepted the nozzle length from 21.00mm to 21.25mm
	Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
	Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
	Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
	Compatible with any V2 gear boxes with 11mm or 11.5mm bore
	Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
	Manually opened to release BBs from inside hopup chamber by hand
	The UV LED Tracer and Electronic Module to glow BBs in the dark ready!
	The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

Maxx Model ME - SPORT CNC Hopup unit for M4 AEG

59,00 €

incl. VAT, shipping costs apply

Sold Out

Maxx Model ME - PRO CNC Hopup unit for M4 AEG With LED

	Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
	Improved accuracy and ensure consistent air seal for M4/M16 Standard AEG series
	Precision rotary dial design for fine hopup adjustments
	Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
	Removable Brass Threaded Slot Pin for setup and maintenance
	Accepted the nozzle length from 21.00mm to 21.25mm
	Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
	Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
	Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
	Compatible with any V2 gear boxes with 11mm or 11.5mm bore
	Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
	Manually opened to release BBs from inside hopup chamber by hand
	The UV LED Tracer and Electronic Module to glow BBs in the dark ready!
	The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

Maxx Model ME - PRO CNC Hopup unit for M4 AEG With LED

79,00 €

incl. VAT, shipping costs apply

Sold Out

Maxx Model LED Board and Module set (for MAXX Hopup series)

34,90 €

incl. VAT, shipping costs apply

Sold Out

CST ALUMINIUM ROTARY HOP-UP CHAMBER AEG M4

27,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Lonex Pom Rotary HOP-UP CHAMBER AEG M4

15,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

CNC ROTARY HOP UP CHAMBER M4

37,00 €

incl. VAT, shipping costs apply

Sold Out

Prometheus HOP UP Tensioner

15,90 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Prometheus Bridge HOP UP Tensioner

15,90 €

incl. VAT, shipping costs apply

Sold Out

Prometheus HOP UP Rubber Soft Type FLAT

14,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Prometheus HOP UP Rubber EXTRA Soft Type FLAT

14,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Prometheus HOP UP Rubber Soft Type

14,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Prometheus Hop Up Rubber HARD Type

14,00 €

incl. VAT, shipping costs apply

Sold Out

MODIFY Flat Hop Soft Type

15,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

MODIFY Flat Hop Heavy Type

15,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

MADBULL Shark Hop Up Rubber 60 Degree

15,90 €

incl. VAT, shipping costs apply

Limited Availability
consegna in 24/48h

G&G Hop Up Rubber

9,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

TM AEG Hop Rubber

Gommino Hop Up siliconico Marui.

1 pezzo.

Compreso di pressore.

Versione OEM

TM AEG Hop Rubber

7,00 €

incl. VAT, shipping costs apply

Limited Availability
consegna in 24/48h

Maple Leaf Super Macaron Hop Up Rubber 50°/60°/70° for AEG

12,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Maple Leaf HOP-UP TENSIONER FOR AEG

BO Maple Leaf HOP-UP TENSIONER FOR AEG

Maple Leaf HOP-UP TENSIONER FOR AEG

5,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Maple Leaf Macaron Hop Up Rubber 50° for AEG

Maple Leaf Macaron Hop Up Rubber 60° for AEG

10,00 €

incl. VAT, shipping costs apply

Limited Availability
consegna in 24/48h

Maple Leaf Diamond Hop Up Rubber 60° for AEG

10,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Maple Leaf Macaron Hop Up Rubber 60° for AEG

10,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Maple Leaf Macaron Hop Up Rubber 70° for AEG

10,00 €

incl. VAT, shipping costs apply

Sold Out

FPS Gommino hop-up Fps 60° shore (HU60N)

6,00 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Prometheus 6.05 BC Bright Barrel

43,90 €

incl. VAT, shipping costs apply

Available
consegna in 24/48h

Prometheus 6.03 EG Barrel

76,90 €

incl. VAT, shipping costs apply

Limited Availability
consegna in 24/48h

Canna interna di precisione FPS 6.03 mm in acciaio inox AISI 304

Fps è orgogliosa di presentare la propria linea di canne interne di precisione in acciaio inossidabile 100% MADE IN ITALY.

Questa inner barrel viene prodotta partendo da un micro tubo in acciaio inox di precisione trafilato che viene successivamente sottoposto alle seguenti lavorazioni:

- tornitura CNC

- rettifica lineare

- alesatura interna

- lappatura

- brillantatura ad ultrasuoni

La forma della finestra hop-up è stata studiata per essere compatibile sia con gommini normali che con quelli di tipo “flat”.

Il materiale utilizzato assicura massima resistenza meccanica e assenza totale di ossidazione superficiale diversamente dall'alluminio o dall'ottone.

Altro grande vantaggio dell'acciaio inox è quello di poter essere tranquillamente pulito con spazzole metalliche senza subire graffiature, assicurando così la più completa rimozione di eventuali residui plastici presenti sulla superficie interna del foro.

Dati tecnici:

- lunghezza: 110 mm

- diametro interno: 6.03 mm

- diametro esterno: 8.51 mm

- materiale: acciaio inox AISI 304

100% MADE IN ITALY

100% MARUI COMPATIBILE

Canna interna di precisione FPS 6.03 mm in acciaio inox AISI 304

50,00 €

incl. VAT, shipping costs apply