La piattaforma real steel MCX by Sig Sauer è stata sviluppata dalla sezione Americana della casa Svizzera, con il chiaro intento di vincere le enormi commesse di fornitura per l’esercito a stelle e strisce.

Già dalla presentazione la linea è stata apprezzata per la sua ergonomia, la struttura modulare e la costruzione estremamente solida, offrendo ai militari un perfetto connubio tra maneggevolezza e spazio per accessori come ottiche, impugnature, torce e laser, rendendola ideale per qualsiasi configurazione tattica.

La versione E&C airsoft si ispira al modello da fuoco , garantendo la presso che totale compatibilità con gli accessori MCX già presenti sul mercato!

Equipaggiato di fabbrica con l’avanzato Gear box 8mm dotato di ETU proprietaria e T hop up rotativa con gommino TDC innestato.

Grilletto elettronico ETU preinstallato facilmente configurabile: Risposta al grilletto più rapida, maggiore efficienza e una durata superiore,

Unendo il design moderno della piattaforma MCX a un controllo elettronico di ultima generazione, questa AEG è progettata per dominare il mercato delle airsoft modulari sia negli ambienti CQB sia negli scenari all’aperto.

CARATTERISTICHE TECNICHE

-Gear box 8mm con cuscinetti

-ETU programmabile

-Ingranaggi acciaio

-Pistone rinforzato POM/acciaio

-Canna da 292x 6.05mm con Hop up rotativo

Caratteristiche Modulo ETU di ultima generazione

-Risposta al grilletto fulminea per colpi più rapidi e precisi

-Modalità di fuoco programmabili: semi, raffica e automatico

-Frenata attiva per colpi in semi più netti e minore stress del motore

-Protezione della batteria contro la sovra scarica, per una maggiore durata

-Protezione del gearbox per ridurre l’usura dei componenti interni

INCLUSO NELLA SCATOLA

-Replica MCX

-Caricatore 120bb

La piattaforma real steel MCX by Sig Sauer è stata sviluppata dalla sezione Americana della casa Svizzera, con il chiaro intento di vincere le enormi commesse di fornitura per l’esercito a stelle e strisce.

Già dalla presentazione la linea è stata apprezzata per la sua ergonomia, la struttura modulare e la costruzione estremamente solida, offrendo ai militari un perfetto connubio tra maneggevolezza e spazio per accessori come ottiche, impugnature, torce e laser, rendendola ideale per qualsiasi configurazione tattica.

La versione E&C airsoft si ispira al modello da fuoco , garantendo la presso che totale compatibilità con gli accessori MCX già presenti sul mercato!

Equipaggiato di fabbrica con l’avanzato Gear box 8mm dotato di ETU proprietaria e T hop up rotativa con gommino TDC innestato.

Grilletto elettronico ETU preinstallato facilmente configurabile: Risposta al grilletto più rapida, maggiore efficienza e una durata superiore,

Unendo il design moderno della piattaforma MCX a un controllo elettronico di ultima generazione, questa AEG è progettata per dominare il mercato delle airsoft modulari sia negli ambienti CQB sia negli scenari all’aperto.

CARATTERISTICHE TECNICHE

-Gear box 8mm con cuscinetti

-ETU programmabile

-Ingranaggi acciaio

-Pistone rinforzato POM/acciaio

-Canna da 225x 6.05mm con Hop up rotativo

Caratteristiche Modulo ETU di ultima generazione

-Risposta al grilletto fulminea per colpi più rapidi e precisi

-Modalità di fuoco programmabili: semi, raffica e automatico

-Frenata attiva per colpi in semi più netti e minore stress del motore

-Protezione della batteria contro la sovra scarica, per una maggiore durata

-Protezione del gearbox per ridurre l’usura dei componenti interni

INCLUSO NELLA SCATOLA

-Replica MCX

-Caricatore 120bb

La piattaforma real steel MCX by Sig Sauer è stata sviluppata dalla sezione Americana della casa Svizzera, con il chiaro intento di vincere le enormi commesse di fornitura per l’esercito a stelle e strisce.

Già dalla presentazione la linea è stata apprezzata per la sua ergonomia, la struttura modulare e la costruzione estremamente solida, offrendo ai militari un perfetto connubio tra maneggevolezza e spazio per accessori come ottiche, impugnature, torce e laser, rendendola ideale per qualsiasi configurazione tattica.

La versione E&C airsoft si ispira al modello da fuoco , garantendo la presso che totale compatibilità con gli accessori MCX già presenti sul mercato!

Equipaggiato di fabbrica con l’avanzato Gear box 8mm dotato di ETU proprietaria e T hop up rotativa con gommino TDC innestato.

Grilletto elettronico ETU preinstallato facilmente configurabile: Risposta al grilletto più rapida, maggiore efficienza e una durata superiore,

Unendo il design moderno della piattaforma MCX a un controllo elettronico di ultima generazione, questa AEG è progettata per dominare il mercato delle airsoft modulari sia negli ambienti CQB sia negli scenari all’aperto.

CARATTERISTICHE TECNICHE

-Gear box 8mm con cuscinetti

-ETU programmabile

-Ingranaggi acciaio

-Pistone rinforzato POM/acciaio

-Canna da 197x 6.05mm con Hop up rotativo

Caratteristiche Modulo ETU di ultima generazione

-Risposta al grilletto fulminea per colpi più rapidi e precisi

-Modalità di fuoco programmabili: semi, raffica e automatico

-Frenata attiva per colpi in semi più netti e minore stress del motore

-Protezione della batteria contro la sovra scarica, per una maggiore durata

-Protezione del gearbox per ridurre l’usura dei componenti interni

INCLUSO NELLA SCATOLA

-Replica MCX

-Caricatore 120bb

La piattaforma real steel MCX by Sig Sauer è stata sviluppata dalla sezione Americana della casa Svizzera, con il chiaro intento di vincere le enormi commesse di fornitura per l’esercito a stelle e strisce.

Già dalla presentazione la linea è stata apprezzata per la sua ergonomia, la struttura modulare e la costruzione estremamente solida, offrendo ai militari un perfetto connubio tra maneggevolezza e spazio per accessori come ottiche, impugnature, torce e laser, rendendola ideale per qualsiasi configurazione tattica.

La versione E&C airsoft si ispira al modello da fuoco , garantendo la presso che totale compatibilità con gli accessori MCX già presenti sul mercato!

Equipaggiato di fabbrica con l’avanzato Gear box 8mm dotato di ETU proprietaria e T hop up rotativa con gommino TDC innestato.

Grilletto elettronico ETU preinstallato facilmente configurabile: Risposta al grilletto più rapida, maggiore efficienza e una durata superiore,

Unendo il design moderno della piattaforma MCX a un controllo elettronico di ultima generazione, questa AEG è progettata per dominare il mercato delle airsoft modulari sia negli ambienti CQB sia negli scenari all’aperto.

CARATTERISTICHE TECNICHE

-Gear box 8mm con cuscinetti

-ETU programmabile

-Ingranaggi acciaio

-Pistone rinforzato POM/acciaio

-Canna da 270x 6.05mm con Hop up rotativo

Caratteristiche Modulo ETU di ultima generazione

-Risposta al grilletto fulminea per colpi più rapidi e precisi

-Modalità di fuoco programmabili: semi, raffica e automatico

-Frenata attiva per colpi in semi più netti e minore stress del motore

-Protezione della batteria contro la sovra scarica, per una maggiore durata

-Protezione del gearbox per ridurre l’usura dei componenti interni

INCLUSO NELLA SCATOLA

-Replica MCX

-Caricatore 120bb

Fully Licensed Product

RWA Edition GATE Aster Inside

Programmable Gearbox

RWA Preset Binary Trigger

Includes Battery Extension Tube and Pad

Quick Release Licensed Fortis Switch Rail

Includes Flip-Up Front and Rear Sights

T-Plug (Deans) Ready

Magazine Compatible with Standard M4 AEG Magazines

The RWA B.A.D. AEG is a project long in the making and features excellence both internally and externally. Fully licensed by cutting-edge firearm and accessories manufacturers Battle Arms Development and Fortis MFG, the RWA B.A.D. AEG is truly a sight to behold. Featuring all of the flagship parts from both companies such as the upper and lower receiver, stock, and rail, this electric airsoft gun is not only sure to turn heads but replicates each part exactly down to the very dimensions seen on the real steel counterparts. 

Externally, the B.A.D. AEG is an AR15 patterned rifle and features Battle Arms Development's flagship LW or Lightweight upper and lower receiver. This receiver is not only highly stylized for the sake of style, but is crafted in a way that is ideal for weight saving. As seen on the previous gas blowback version, each line and cut is carefully crafted to be 1:1 with the real steel version. This level of accuracy is translated to the controls as well. All the control surfaces such as the magazine release, bolt release, and selector are licensed by B.A.D. and compliments the rifle nicely. In addition, you will find the wildly loved B.A.D. VERT stock and a buffer tube extension plus removeable butt pad for additional storage space. This is to ensure each user has the opportunity to maintain the sleek look of the rifle with still using Titan Batteries! 

The Fortis SWITCH handguard is a lightweight, skinny M-LOK rail that features a quick detach function. This function is ideal for shooters or users that want to preset their rail before placing it on the rifle. The benefit of this is to allow easy installation of M-LOK compatible accessories without having to deal with the barrel getting in the way of installation. This also means if you have more than one of these guns, you have potentially endless possibilities when it comes to rifle setup. 

Internally the RWA B.A.D. AEG is no slouch. This electric airsoft gun comes with an RWA edition Gate Aster and is hand tuned to ensure optimal performance right out of the box. The trigger feeling is extremely snappy and responsive while offering a smooth pull and break. Perhaps the one feature that will be sure the put a smile on your face is the preset binary trigger mode. This allows the user to take full advantage of the rifle's high performance by shooting one BB when you pull the trigger and a second BB when you release the trigger. This binary trigger function easily allows any shooter to send a volley of BBs downrange at a rapid and accurate pace! 

The hop-up is a rotary style hop that is easy to adjust and holds in place nicely. It's effective for both lightweight and heavier weight BBs.  As we previously alluded to the usage of Titan batteries, this AEG comes T-Plugs (Deans) ready.  

Features:

Fortis Licensed SWITCH 556 Rail System - MLOK 

B.A.D. Licensed Collapsible VERT Stock 

B.A.D. Licensed 556-LW Receiver 

B.A.D. Licensed Lightweight Low Profile Gas Block 

B.A.D. Licensed BAD-ASS Safety 

B.A.D. Licensed Enhanced Bolt Catch 

B.A.D. Licensed Large Enhanced Modular Magazine Release 

B.A.D. Licensed Enhanced Takedown Pin 

B.A.D. Licensed BAD-ATG AEG Grip 

Fully Licensed Product

RWA Edition GATE Aster Inside

Programmable Gearbox

RWA Preset Binary Trigger

Includes Battery Extension Tube and Pad

Quick Release Licensed Fortis Switch Rail

Includes Flip-Up Front and Rear Sights

T-Plug (Deans) Ready

Magazine Compatible with Standard M4 AEG Magazines

The RWA B.A.D. AEG is a project long in the making and features excellence both internally and externally. Fully licensed by cutting-edge firearm and accessories manufacturers Battle Arms Development and Fortis MFG, the RWA B.A.D. AEG is truly a sight to behold. Featuring all of the flagship parts from both companies such as the upper and lower receiver, stock, and rail, this electric airsoft gun is not only sure to turn heads but replicates each part exactly down to the very dimensions seen on the real steel counterparts. 

Externally, the B.A.D. AEG is an AR15 patterned rifle and features Battle Arms Development's flagship LW or Lightweight upper and lower receiver. This receiver is not only highly stylized for the sake of style, but is crafted in a way that is ideal for weight saving. As seen on the previous gas blowback version, each line and cut is carefully crafted to be 1:1 with the real steel version. This level of accuracy is translated to the controls as well. All the control surfaces such as the magazine release, bolt release, and selector are licensed by B.A.D. and compliments the rifle nicely. In addition, you will find the wildly loved B.A.D. VERT stock and a buffer tube extension plus removeable butt pad for additional storage space. This is to ensure each user has the opportunity to maintain the sleek look of the rifle with still using Titan Batteries! 

The Fortis SWITCH handguard is a lightweight, skinny M-LOK rail that features a quick detach function. This function is ideal for shooters or users that want to preset their rail before placing it on the rifle. The benefit of this is to allow easy installation of M-LOK compatible accessories without having to deal with the barrel getting in the way of installation. This also means if you have more than one of these guns, you have potentially endless possibilities when it comes to rifle setup. 

Internally the RWA B.A.D. AEG is no slouch. This electric airsoft gun comes with an RWA edition Gate Aster and is hand tuned to ensure optimal performance right out of the box. The trigger feeling is extremely snappy and responsive while offering a smooth pull and break. Perhaps the one feature that will be sure the put a smile on your face is the preset binary trigger mode. This allows the user to take full advantage of the rifle's high performance by shooting one BB when you pull the trigger and a second BB when you release the trigger. This binary trigger function easily allows any shooter to send a volley of BBs downrange at a rapid and accurate pace! 

The hop-up is a rotary style hop that is easy to adjust and holds in place nicely. It's effective for both lightweight and heavier weight BBs.  As we previously alluded to the usage of Titan batteries, this AEG comes T-Plugs (Deans) ready.  

Features:

Fortis Licensed SWITCH 556 Rail System - MLOK 

B.A.D. Licensed Collapsible VERT Stock 

B.A.D. Licensed 556-LW Receiver 

B.A.D. Licensed Lightweight Low Profile Gas Block 

B.A.D. Licensed BAD-ASS Safety 

B.A.D. Licensed Enhanced Bolt Catch 

B.A.D. Licensed Large Enhanced Modular Magazine Release 

B.A.D. Licensed Enhanced Takedown Pin 

B.A.D. Licensed BAD-ATG AEG Grip 

The VFC Avalon Machete being part of the VFC Avalon Premium line, this AEG has been further upgraded. Externally it has a bunch of cool furniture from BCM AIR such as the BCM AIR MCMR 7" Rail system, the BCM AIR Gunfighter MOD 3 pistol grip, the Gunfighter vertical grip MOD 3, and the Gunfighter AMBI charging handle.

Internally, the VFC Avalon Machete has the VFC ECS gearbox with the GATE ASTER system installed. In turn, this instantly makes this AEG one of the top AEGs out of the box. GATE ASTER features programmable electronics, like a trigger proximity sensor that allows you to fine-tune 250 trigger sensitivity settings, a binary trigger function as a basic setup, an optical gear cam sensor that supports all types of gears, and allows you to program the guns firing mode from semi/full auto to semi/burst for example. Adding to this impressive list, the Avalon Machete comes standard with Maple Leaf internals such as the hop-up bucking and a precision inner barrel allowing for your groupings to be tighter and have an extended range capability. Lastly, the Avalon Machete comes Deans (T-Plugs) ready. 

• VFC Avalon Premium Series
• BCM AIR Licensed Furniture 
• VFC ECS Gearbox
• GATE ASTER ECU
• 229mm Maple Leaf Precision Barrel
• Maple Leaf Hop Up Bucking
• Ambidextrous Controls
• VFC QRS PDW Stock

Polymer body and metal Gearbox V3

Economic model with polymer body of the famous AKS74 in short version, with its folding stock. Originally equipped with a metal Gearbox V3 with steel gears on 8mm bearings and quick spring change.

Gearbox V3 metal with quick spring change

Metal gears on 8mm ball bearings

Adjustable hop-up

6.02x270mm inner barrel

Hi-torque motor

Semi and full auto

Hi-cap magazine 400 bbs (ABS) black

Ergonomic grip handle type AK74

Folding polymer stock

Polymer body

Polymer flash hider

Outer barrel, sight, sight, gas tube, fire selector, metal cocking lever

Polymer handguard

Tamiya mini battery connector

Real wood handguard

Metal body model of the famous AKS74 in a short version, with its folding metal stock and its wooden handguard. Originally equipped with a side rail for mounting optics for AK.

The body, stock, outer barrel and sights are made of steel.

Gearbox V3 metal with quick spring change

Metal gears on 8mm ball bearings

Adjustable hop-up

Internal barrel 6.02x270mm

Hi-torque motor

Semi and full auto

Hi-cap magazine 450 bbs in orange imitation bakelite (ABS)

Steel side mounting rail (for mounting an AK side rail)

Ergonomic grip handle type AK74

Steel folding metal stock

Steel body

Steel flash hider (16mm anti-clockwise), replica screws 14mm anti-clockwise (there is an adapter between the replica and the flash hider)

Outer barrel, sight, sight, gas tube, fire selector, cocking lever, stock, trigger, magazine lock, top cover on metal pivot (steel)

Real wood handguard

Mini-Tamiya battery plug

A replica of an AK-based tactical carbine manufactured by Arcturus. The AKMOD1 was made mainly from steel and a few elements from aluminium, a durable polymer and equipped with a number of amenities improving the performance of the rifle. Steel is used to make the base of the musket, barrel holder, cover, dummy lock, selector, barrel locking mechanism, trigger guard, barrel lock, magazine lock and dummy locking chamber. Aluminum is used for the barrel, 5-position stock guide, the barrel base, the gas tube with RIS rail, the M-LOK handguard and the flame damper. The magazine, stock with rubber feet and pistol grip with integrated trigger guard are made of polymer.

All parts fit together with great accuracy, the metal parts have been finished with a non-corrosive matt coating. The interior of the replica provides very good performance in the factory configuration and a good base for tuning.

Inside the replica we find:

-6.03mm precision barrel

-Rotating Hop Up chamber

-21TPA motor

-18:1 steel gears

-CNC POM nozzle

-CNC machined stainless steel cylinder

-Piston with steel jaw

-Quick-change spring system with steel-bearing spring guide

The model belongs to the FE or Feature Enhanced series, which means that the replica is equipped with an optical, programmable control system.

Features of the FE ETU optical system:

-Pre-Cocking (7 degrees)

-Active Break (8 stages)

-Adjustable trigger hardness (5 degrees)

-Adjustable trigger reset (5 degrees)

-Progressive algorithm-guided trigger

-Adaptive hair-trigger

-Programmable fire modes

-Binary trigger with Ramping

-Low Battery Protection

-Electronic fuse

Package include:

Deans adapter - small Tamyia

Mid-Cap Magazine

Patch

Replica

A replica of an AK-based tactical carbine manufactured by Arcturus. The AKMOD1 was made mainly from steel and a few elements from aluminium, a durable polymer and equipped with a number of amenities improving the performance of the rifle. Steel is used to make the base of the musket, barrel holder, cover, dummy lock, selector, barrel locking mechanism, trigger guard, barrel lock, magazine lock and dummy locking chamber. Aluminum is used for the barrel, 5-position stock guide, the barrel base, the gas tube with RIS rail, the M-LOK handguard and the flame damper. The magazine, stock with rubber feet and pistol grip with integrated trigger guard are made of polymer.

All parts fit together with great accuracy, the metal parts have been finished with a non-corrosive matt coating. The interior of the replica provides very good performance in the factory configuration and a good base for tuning.

Inside the replica we find:

-6.03mm precision barrel

-Rotating Hop Up chamber

-21TPA motor

-18:1 steel gears

-CNC POM nozzle

-CNC machined stainless steel cylinder

-Piston with steel jaw

-Quick-change spring system with steel-bearing spring guide

The model belongs to the FE or Feature Enhanced series, which means that the replica is equipped with an optical, programmable control system.

Features of the FE ETU optical system:

-Pre-Cocking (7 degrees)

-Active Break (8 stages)

-Adjustable trigger hardness (5 degrees)

-Adjustable trigger reset (5 degrees)

-Progressive algorithm-guided trigger

-Adaptive hair-trigger

-Programmable fire modes

-Binary trigger with Ramping

-Low Battery Protection

-Electronic fuse

Package include:

Deans adapter - small Tamyia

Mid-Cap Magazine

Patch

Replica

Arcturus LWT MK-III PDW 5.5" SPORT AEG SE® airsoft Carbine

The SPORT series from Arcturus is primarily designed for beginners who are looking for a lightweight, durable and reliable replica. However, more advanced users will also appreciate the SPORT series models .

The airsoft carbine from the Arcturus company, model LWTMK-III PDW 5.5" SPORT AEG SE® , was made primarily using glass fibre reinforced PA66 polymer. Steel was used to make the stock guide, the screws at the handguard, the dummy slide. Aluminium is used for the manipulators (including the operating bolt-catch), the reloading handle, the slide attachment and the barrel extension, which houses the battery compartment. Polymer is used for the 5.7-inch-long M-LOK barrel. The barrel features a dorsal RIS rail, which allows the attachment of a scope or red dot sight, for example. Also made of polymer: the ergonomic pistol grip, which has a rough surface, the foot of the adjustable PDW stock, mechanical sighting instruments, replica sound suppressor.

The replica is light, well-fitted and balanced, its interior provides very good performance in the factory configuration and a good base for tuning.

Inside the replica we find:

- Gearbox V2 Hybrid with QSC

- Polymer nozzle

- Polymer spring guide

- Reinforced gearbox front

- CNC stainless steel cylinder

- 18:1 gears

- Hop-up rotary unit

- 23T motor (ferrite)

- SE optical control system

The model belongs to the SE or Standard Enhanced series, which means that the replica has been equipped with a programmable optical control system.

Functions of the SE ETU optical system:

- Pre-Cocking (2 stages)

- Active Break (2 stages)

- Progressive trigger

- Programmable fire modes

- Binary trigger with Ramping

- Low Battery Protection

- Electronic fuse

Package include:

Cleaning rod

Hi-Cap Magazine

Replica

Allen key

Assembly key

Small Tamyia - Deans adapter

The airsoft carbine from Arcturus model MOD1 SBR 7.9" AEG NEO ME® was made primarily using polymer. The following are made of metal : screws, pins, QD mount on the butt, dummy slide, manipulators (working bolt-catch and magazine release button). The following were made from polymer: the barrel, the M-LOK handguard (a handguard made from polymer that has been reinforced with nylon fibre) with a length of 7.9 inches. A RIS rail can be found on the handguard and body to allow the attachment of optics. From the polymer we will additionally find: pistol grip, stock guide, MOD1 WKS LBC adjustable buttstock, discharge device, hi-cap magazine, reloading levers and mechanical sighting instruments.

Inside the replica we find:

- Gearbox V2 with QSC and microstock

- POM CNC nozzle (sealed)

- CNC steel cylinder

- Piston with full steel jaw

- Rotary hop-up chamber

- 23T motor (ferrite)

- 18:1 gears

- Ultra Compact Mosfet

The model belongs to the ME series or Mosfet Enhanced Edition, which means that the replica features:

- Improved trigger response

- Operation with neodymium motors

- Physical microstock protection

Package include:

Cleaning rod

Hi-Cap Magazine

Replica

Allen key

Assembly key

Small Tamyia - Deans adapter

Arcturus NEO MOD1 CQB 10.6" AEG NEO ME® airsoft Carbine

The NEO series from Arcturus is primarily designed for beginners who are looking for a lightweight, durable and reliable replica equipped with a microstock and mosfet.

The airsoft carbine from Arcturus model MOD1 CQB 10.6" AEG NEO ME® was made primarily using polymer. The following are made of metal : screws, pins, QD mount on the butt, dummy slide, manipulators (working bolt-catch and magazine release button). Made of polymer: the barrel, the M-LOK handguard (a handguard made of polymer that has been reinforced with nylon fibre) with a length of 10.6 inches. On the handguard and the barrel we find a RIS rail, which will allow the attachment of optics. From the polymer we will additionally find: pistol grip, stock guide, MOD1 WKS LBC adjustable buttstock, discharge device, hi-cap magazine, reloading levers and mechanical sighting instruments.

Inside the replica we find:

- Gearbox V2 with QSC and microstock

- POM CNC nozzle (sealed)

- CNC steel cylinder

- Piston with full steel jaw

- Rotary hop-up chamber

- 23T motor (ferrite)

- 18:1 gears

- Ultra Compact Mosfet

The model belongs to the ME series or Mosfet Enhanced Edition, which means that the replica features:

- Improved trigger response

- Operation with neodymium motors

- Physical microstock protection

Package include:

Cleaning rod

Hi-Cap Magazine

Replica

Allen key

Assembly key

Small Tamyia - Deans adapter