Features:

10-inch M-LOK compatible handguard that provides ample space to mount lights, lasers, and other M-LOK compatible accessories.

The handguard features QD slots on both sides of the handguard for sling attachment installation.

The reinforced and redesigned V2 Metal Gearbox features ultra-smooth 8mm bearings, an 18:1 steel gear ratio, steel teeth, a polycarbonate piston, a bearing spring guide, a rotating hop-up, and a high-speed 19,000 RPM neodymium magnet motor that delivers consistent performance.

The Nebula 2 ETU features a new optical design. This pistol is equipped with Zion Arms' fully programmable electronic trigger, allowing it to fire in multiple modes.

Low resistance wiring prevents potential battery damage

The polished copper 6.03mm precision barrel improves range and accuracy.

The all-metal gearbox features a quick-change spring accessible from the rear of the replica.

The ergonomic textured polymer handle improves your grip and provides a comfortable feel for long games.

Firing modes: SAFE/SEMI AUTO/FULL AUTO)

Battery and charger not included: provide a Lipo 11.1V T-Dean

When using the device for the first time, you must activate the electronic trigger. To do this, connect your battery, place the selector in the "Safe" position, then press and hold the trigger for a few seconds.

The Zion Arms R15 MK2 10" Rail AEG features a Nebula II electronic trigger unit, offering programmable firing modes for increased flexibility in the field. Its reinforced metal Version 2 gearbox, featuring 8mm bearings and a 19,000 RPM neodymium magnet motor, ensures consistent performance.

The 6.03mm precision barrel improves range and accuracy, allowing you to hit targets out to 60+ meters with 0.20g BBs. The 10-inch M-LOK handguard provides ample space for mounting accessories such as lights, lasers, and optics, while QD mounting points on both sides of the handguard allow for versatile sling attachment.

The rifle also features a rear-accessible quick-change spring system, making it easy to adjust the power to suit the demands of the terrain. The ergonomic design of the textured polymer grip ensures a comfortable grip, even during long gaming sessions. With its programmable semi-automatic, full-automatic, and burst firing modes, the Zion Arms R15 MK2 adapts to any gaming situation.

Total length: approximately 780 mm

Weight: about 2.8 kg

Magazine Capacity: 140 BBs (Mid-Cap)

Materials: CNC aluminum upper and lower receivers, polymer grip and stock

Battery connector: Deans, rear wired

Recommended Battery: 11.1V LiPo Battery (not included)

Features:

10-inch M-LOK compatible handguard that provides ample space to mount lights, lasers, and other M-LOK compatible accessories.

The handguard features QD slots on both sides of the handguard for sling attachment installation.

The reinforced and redesigned V2 Metal Gearbox features ultra-smooth 8mm bearings, an 18:1 steel gear ratio, steel teeth, a polycarbonate piston, a bearing spring guide, a rotating hop-up, and a high-speed 19,000 RPM neodymium magnet motor that delivers consistent performance.

The Nebula 2 ETU features a new optical design. This pistol is equipped with Zion Arms' fully programmable electronic trigger, allowing it to fire in multiple modes.

Low resistance wiring prevents potential battery damage

The polished copper 6.03mm precision barrel improves range and accuracy.

The all-metal gearbox features a quick-change spring accessible from the rear of the replica.

The ergonomic textured polymer handle improves your grip and provides a comfortable feel for long games.

Firing modes: SAFE/SEMI AUTO/FULL AUTO)

Battery and charger not included: provide a Lipo 11.1V T-Dean

When using the device for the first time, you must activate the electronic trigger. To do this, connect your battery, place the selector in the "Safe" position, then press and hold the trigger for a few seconds.

The Zion Arms R15 MK2 10" Rail AEG features a Nebula II electronic trigger unit, offering programmable firing modes for increased flexibility in the field. Its reinforced metal Version 2 gearbox, featuring 8mm bearings and a 19,000 RPM neodymium magnet motor, ensures consistent performance.

The 6.03mm precision barrel improves range and accuracy, allowing you to hit targets out to 60+ meters with 0.20g BBs. The 10-inch M-LOK handguard provides ample space for mounting accessories such as lights, lasers, and optics, while QD mounting points on both sides of the handguard allow for versatile sling attachment.

The rifle also features a rear-accessible quick-change spring system, making it easy to adjust the power to suit the demands of the terrain. The ergonomic design of the textured polymer grip ensures a comfortable grip, even during long gaming sessions. With its programmable semi-automatic, full-automatic, and burst firing modes, the Zion Arms R15 MK2 adapts to any gaming situation.

Total length: approximately 780 mm

Weight: about 2.8 kg

Magazine Capacity: 140 BBs (Mid-Cap)

Materials: CNC aluminum upper and lower receivers, polymer grip and stock

Battery connector: Deans, rear wired

Recommended Battery: 11.1V LiPo Battery (not included)

The Zion Arms R&D Precision AEG is an authentic, officially licensed 1:1 scale replica that features the same look and feel as the actual models . Here it is in its black version with long hand guard.

Battery and battery charger not included

11.1V Lipo battery recommended

Gearbox:

Metal gearbox shells

18:1 ratio steel gears (Sector Gear specific to work with ETU Nebula Zion Arms)

delay

8mm bearings

14 tooth steel piston

Black anodized cylinder for improved surface finish

19000rpm motor

QD spring guide on bearings

Spring M90

Quick spring change (QD)

Shielded low resistance wiring

Hi-speed type metal trigger

Electronic trigger block ETU Nebula Zion Arms with protection mosfet integrated into the electronic board

16AWG shielded wiring (rear)

Internal parts:

Precision 6.03mm aluminum barrel

Center wheel hop-up block (Gen 2)

50° hop-up joint

External parts:

M-LOK 10" handguard that offers enough space to mount accessories. (Lamp, Laser...)

CNC Aluminum body

The handguard has QD slots to attach a strap clip (in right or left handed configuration)

This variant of the PW9 now comes with a "delta" stock

Full length 20mm top picatinny rail that allows for the installation of optics, lights, lasers or PEQ boxes

Ergonomic handle improves grip and comfort

One-piece metal outer barrel

Ergonomic trigger guard

Metal stock tube

Steel dummy cylinder head

Metal cocking lever with hi-speed handle

Metal magazine catch

Functional metal bolt catch

120 Round Polymer Mid-Cap Magazine

T-Dean battery connector

The Zion Arms R&D Precision AEG is an authentic, officially licensed 1:1 scale replica that features the same look and feel as the actual models . Here it is in its black version with long hand guard.

Battery and battery charger not included

11.1V Lipo battery recommended

Gearbox:

Metal gearbox shells

18:1 ratio steel gears (Sector Gear specific to work with ETU Nebula Zion Arms)

delay

8mm bearings

14 tooth steel piston

Black anodized cylinder for improved surface finish

19000rpm motor

QD spring guide on bearings

Spring M90

Quick spring change (QD)

Shielded low resistance wiring

Hi-speed type metal trigger

Electronic trigger block ETU Nebula Zion Arms with protection mosfet integrated into the electronic board

16AWG shielded wiring (rear)

Internal parts:

Precision 6.03mm aluminum barrel

Center wheel hop-up block (Gen 2)

50° hop-up joint

External parts:

M-LOK 10" handguard that offers enough space to mount accessories. (Lamp, Laser...)

CNC Aluminum body

The handguard has QD slots to attach a strap clip (in right or left handed configuration)

This variant of the PW9 now comes with a "delta" stock

Full length 20mm top picatinny rail that allows for the installation of optics, lights, lasers or PEQ boxes

Ergonomic handle improves grip and comfort

One-piece metal outer barrel

Ergonomic trigger guard

Metal stock tube

Steel dummy cylinder head

Metal cocking lever with hi-speed handle

Metal magazine catch

Functional metal bolt catch

120 Round Polymer Mid-Cap Magazine

T-Dean battery connector

The Zion Arms R&D Precision AEG is an authentic, officially licensed 1:1 scale replica that features the same look and feel as the actual models . Here it is in its black version with long hand guard.

Battery and battery charger not included

11.1V Lipo battery recommended

Gearbox:

Metal gearbox shells

18:1 ratio steel gears (Sector Gear specific to work with ETU Nebula Zion Arms)

delay

8mm bearings

14 tooth steel piston

Black anodized cylinder for improved surface finish

19000rpm motor

QD spring guide on bearings

Spring M90

Quick spring change (QD)

Shielded low resistance wiring

Hi-speed type metal trigger

Electronic trigger block ETU Nebula Zion Arms with protection mosfet integrated into the electronic board

16AWG shielded wiring (rear)

Internal parts:

Precision 6.03mm aluminum barrel

Center wheel hop-up block (Gen 2)

50° hop-up joint

External parts:

M-LOK 10" handguard that offers enough space to mount accessories. (Lamp, Laser...)

CNC Aluminum body

The handguard has QD slots to attach a strap clip (in right or left handed configuration)

This variant of the PW9 now comes with a "delta" stock

Full length 20mm top picatinny rail that allows for the installation of optics, lights, lasers or PEQ boxes

Ergonomic handle improves grip and comfort

One-piece metal outer barrel

Ergonomic trigger guard

Metal stock tube

Steel dummy cylinder head

Metal cocking lever with hi-speed handle

Metal magazine catch

Functional metal bolt catch

120 Round Polymer Mid-Cap Magazine

T-Dean battery connector

The Zion Arms R&D Precision AEG is an authentic, officially licensed 1:1 scale replica that features the same look and feel as the actual models . Here it is in its black version with long hand guard.

Battery and battery charger not included

11.1V Lipo battery recommended

Gearbox:

Metal gearbox shells

18:1 ratio steel gears (Sector Gear specific to work with ETU Nebula Zion Arms)

delay

8mm bearings

14 tooth steel piston

Black anodized cylinder for improved surface finish

19000rpm motor

QD spring guide on bearings

Spring M90

Quick spring change (QD)

Shielded low resistance wiring

Hi-speed type metal trigger

Electronic trigger block ETU Nebula Zion Arms with protection mosfet integrated into the electronic board

16AWG shielded wiring (rear)

Internal parts:

Precision 6.03mm aluminum barrel

Center wheel hop-up block (Gen 2)

50° hop-up joint

External parts:

M-LOK 10" handguard that offers enough space to mount accessories. (Lamp, Laser...)

CNC Aluminum body

The handguard has QD slots to attach a strap clip (in right or left handed configuration)

This variant of the PW9 now comes with a "delta" stock

Full length 20mm top picatinny rail that allows for the installation of optics, lights, lasers or PEQ boxes

Ergonomic handle improves grip and comfort

One-piece metal outer barrel

Ergonomic trigger guard

Metal stock tube

Steel dummy cylinder head

Metal cocking lever with hi-speed handle

Metal magazine catch

Functional metal bolt catch

120 Round Polymer Mid-Cap Magazine

T-Dean battery connector