MAC-Redline N7G2 Reduction Kit Volume Reducer Filler

MAC-Redline N7G2 Reduction Kit Volume Reducer Filler

9,00 €

  • Available
  • consegna in 24/48h

GUN SAV Hpa Grease

GUN SAV Hpa Grease

14,00 €

  • Available
  • Disponibile in 3-5 giorni

Redline N7 FCU Wire Harness (M4)

Redline N7 FCU Wire Harness (M4)

25,00 €

  • Available
  • consegna in 24/48h

Redline V2 Trigger Board N7

Redline V2 Trigger Board N7

39,00 €

  • Limited Availability
  • consegna in 24/48h

Redline V3 Trigger Board N7

Redline V2 Trigger Board N7

39,00 €

  • Limited Availability
  • consegna in 24/48h

REDLINE N7 GEN-2 FCU V2 (M4)

The Redline N7 Gen2 is a Patent Pending HPA drop in cylinder replacement system. It is an updated version of our legendary N7. The very first single solenoid, true closed bolt HPA engine.

Like the original N7, the N7 Gen-2 uses a single solenoid, has a forward biased nozzle and fires from a true closed bolt.

The most noticeable change from the original N7 is the elimination of the external airline to the nozzle. We have also updated the internal components and slightly reduced the size of the air chamber. Functionally however, it is identical to the original N7.

Meaning you get the same great performance and easy setup that the original N7 engines were known for.

Due to its true closed bolt design and air balanced nozzle return, the N7 Gen-2 is much more consistent in seating the BB in the bucking from shot to shot when compared to a typical open bolt HPA engine. The result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range when compared to open bolt HPA engines.

Just like the original N7 the N7 Gen-2 uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the N7 Gen-2 fills an internal air chamber at the pressure set by the user’s external supply regulator.

 When fired, this air chamber is mechanically sealed off from the supply and the chambers contents is released down the barrel to propel the BB. This feature contributes to the N7 Gen-2’s excellent shot to shot consistency, with no air wasted due to improper dwell settings.

The N7 Gen-2 is super simple to set up. Since there is no poppet dwell to tune you simply set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot, regardless of BB weight, barrel length or any other factor is all that is released.

The FCU is programmable for:

1: Nozzle Dwell.  

2: Semi Auto Max Rate of Fire

3: Full Auto / Burst Mode

4: Full Auto Rate of Fire

5: Anti Stiction Pulse

6: Selector position

 

 N7 Gen-2, key features:

True closed bolt, single solenoid HPA cylinder replacement.                                                                                                                          

Super easy to setup. Most people can just install and play with no FCU tuning needed.

Easy hop tuning do to its true closed bolt design.

Fixed sized dump chamber design means no poppet dwell tuning required.

Convertible from Electro-Pneumatic to fully Mechanical/Pneumatic with optional conversion kit.

Less "joule creep" than typical HPA engines.

100% designed and manufactured in the USA

REDLINE N7 GEN-2 FCU V2 (M4)

399,00 €

  • Available
  • consegna in 24/48h

REDLINE N7 GEN-2 FCU V2 VFC HK417

The Redline N7 Gen2 is a Patent Pending HPA drop in cylinder replacement system. It is an updated version of our legendary N7. The very first single solenoid, true closed bolt HPA engine.

Like the original N7, the N7 Gen-2 uses a single solenoid, has a forward biased nozzle and fires from a true closed bolt.

The most noticeable change from the original N7 is the elimination of the external airline to the nozzle. We have also updated the internal components and slightly reduced the size of the air chamber. Functionally however, it is identical to the original N7.

Meaning you get the same great performance and easy setup that the original N7 engines were known for.

Due to its true closed bolt design and air balanced nozzle return, the N7 Gen-2 is much more consistent in seating the BB in the bucking from shot to shot when compared to a typical open bolt HPA engine. The result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range when compared to open bolt HPA engines.

Just like the original N7 the N7 Gen-2 uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the N7 Gen-2 fills an internal air chamber at the pressure set by the user’s external supply regulator.

 When fired, this air chamber is mechanically sealed off from the supply and the chambers contents is released down the barrel to propel the BB. This feature contributes to the N7 Gen-2’s excellent shot to shot consistency, with no air wasted due to improper dwell settings.

The N7 Gen-2 is super simple to set up. Since there is no poppet dwell to tune you simply set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot, regardless of BB weight, barrel length or any other factor is all that is released.

The FCU is programmable for:

1: Nozzle Dwell.  

2: Semi Auto Max Rate of Fire

3: Full Auto / Burst Mode

4: Full Auto Rate of Fire

5: Anti Stiction Pulse

6: Selector position

 

 N7 Gen-2, key features:

True closed bolt, single solenoid HPA cylinder replacement.                                                                                                                          

Super easy to setup. Most people can just install and play with no FCU tuning needed.

Easy hop tuning do to its true closed bolt design.

Fixed sized dump chamber design means no poppet dwell tuning required.

Convertible from Electro-Pneumatic to fully Mechanical/Pneumatic with optional conversion kit.

Less "joule creep" than typical HPA engines.

100% designed and manufactured in the USA

REDLINE N7 GEN-2 FCU V2 VFC HK417

429,00 €

  • Sold Out

REDLINE N7 GEN-2 FCU V2 M4 AMOEBA Series

The Redline N7 Gen2 is a Patent Pending HPA drop in cylinder replacement system. It is an updated version of our legendary N7. The very first single solenoid, true closed bolt HPA engine.

Like the original N7, the N7 Gen-2 uses a single solenoid, has a forward biased nozzle and fires from a true closed bolt.

The most noticeable change from the original N7 is the elimination of the external airline to the nozzle. We have also updated the internal components and slightly reduced the size of the air chamber. Functionally however, it is identical to the original N7.

Meaning you get the same great performance and easy setup that the original N7 engines were known for.

Due to its true closed bolt design and air balanced nozzle return, the N7 Gen-2 is much more consistent in seating the BB in the bucking from shot to shot when compared to a typical open bolt HPA engine. The result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range when compared to open bolt HPA engines.

Just like the original N7 the N7 Gen-2 uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the N7 Gen-2 fills an internal air chamber at the pressure set by the user’s external supply regulator.

 When fired, this air chamber is mechanically sealed off from the supply and the chambers contents is released down the barrel to propel the BB. This feature contributes to the N7 Gen-2’s excellent shot to shot consistency, with no air wasted due to improper dwell settings.

The N7 Gen-2 is super simple to set up. Since there is no poppet dwell to tune you simply set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot, regardless of BB weight, barrel length or any other factor is all that is released.

The FCU is programmable for:

1: Nozzle Dwell.  

2: Semi Auto Max Rate of Fire

3: Full Auto / Burst Mode

4: Full Auto Rate of Fire

5: Anti Stiction Pulse

6: Selector position

 

 N7 Gen-2, key features:

True closed bolt, single solenoid HPA cylinder replacement.                                                                                                                          

Super easy to setup. Most people can just install and play with no FCU tuning needed.

Easy hop tuning do to its true closed bolt design.

Fixed sized dump chamber design means no poppet dwell tuning required.

Convertible from Electro-Pneumatic to fully Mechanical/Pneumatic with optional conversion kit.

Less "joule creep" than typical HPA engines.

100% designed and manufactured in the USA

REDLINE N7 GEN-2 FCU V2 M4 AMOEBA Series

429,00 €

  • Limited Availability
  • Disponibile in 15 Giorni

REDLINE N7 GEN-2 FCU V3 (AK)

The Ver-3 kit ships with a G&G AK nozzle. This nozzle works for most TM compatible AK's

The Redline N7 Gen2 is a Patent Pending HPA drop in cylinder replacement system. It is an updated version of our legendary N7. The very first single solenoid, true closed bolt HPA engine.

Like the original N7, the N7 Gen-2 uses a single solenoid, has a forward biased nozzle and fires from a true closed bolt.

The most noticeable change from the original N7 is the elimination of the external airline to the nozzle. We have also updated the internal components and slightly reduced the size of the air chamber. Functionally however, it is identical to the original N7.

Meaning you get the same great performance and easy setup that the original N7 engines were known for.

 

Due to its true closed bolt design and air balanced nozzle return, the N7 Gen-2 is much more consistent in seating the BB in the bucking from shot to shot when compared to a typical open bolt HPA engine. The result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range when compared to open bolt HPA engines.

Just like the original N7 the N7 Gen-2 uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the N7 Gen-2 fills an internal air chamber at the pressure set by the user’s external supply regulator.

 When fired, this air chamber is mechanically sealed off from the supply and the chambers contents is released down the barrel to propel the BB. This feature contributes to the N7 Gen-2’s excellent shot to shot consistency, with no air wasted due to improper dwell settings.

The N7 Gen-2 is super simple to set up. Since there is no poppet dwell to tune you simply set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot, regardless of BB weight, barrel length or any other factor is all that is released.

The FCU is programmable for:

1: Nozzle Dwell.  

2: Semi Auto Max Rate of Fire

3: Full Auto / Burst Mode

4: Full Auto Rate of Fire

5: Anti Stiction Pulse

6: Selector position

REDLINE N7 GEN-2 FCU V3 (AK)

399,00 €

  • Limited Availability
  • consegna in 24/48h

REDLINE N7 Gen-2 V2 (M4) HPA conversion kit V2 Complete Set

Kit Completo A ;

Tippman Tank 0,8L 

Balystik HPR800Cv3

Balystik Linea US Type

Batteria Lipo 7,4V 300mha

 

Kit Completo B ;

Tank 0,8L SOGER Carbon

Balystik HPR800Cv3

Balystik Linea US Type

Batteria Lipo 7,4V 300mha

 

Kit Completo C ;

Tank 1,1L SOGER Carbon

Balystik HPR800Cv3

Balystik Linea US Type

Batteria Lipo 7,4V 300mha

 

Kit Completo D ;

Tank 0,8L SOGER Carbon

Redline Mini SFR Regulator with Hoses

Batteria Lipo 7,4V 300mha

 

Kit Completo E ;

Tank 1,1L SOGER Carbon

Redline Mini SFR Regulator with Hoses

Batteria Lipo 7,4V 300mha

 

Kit Completo F ;

Tank 1,1L FUEL Ultralite Carbon

Redline Mini SFR Regulator with Hoses

 

Batteria Lipo 7,4V 300mha

Redline N7 HPA Engine Complete KIT

549,00 €

  • Available
  • consegna in 24/48h

Millepinocchi Airsoft Custom di LARI ALESSANDRO
Via Cavour 181
55011 Altopascio (LUCCA) - ITALIA
Partita IVA:02429410463

mmmillepinocchi@gmail.com

 

Orari Apertura:

Lunedi Mattina : 10 - 13 Pomeriggio CHIUSO

Martedi : 14 -19

Mercoledi : 14 -19

Giovedi : 14 -19

Venerdi : 14 -19

Sabato : 10 - 19

Domenica : CHIUSO